TECO Open Drip Proof

• Altitude above 1000 m (on request)
• Rotor Material: Choose from Aluminium, copper, or brass rotor options, depending on the starting torque requirement of the application.
• Ambient temperature above 40 °C
• Base: rail, sliding base, extended feet, rebuilt feet, anchorage plate
• Bearing thermometer with gauge with/without contacts
• Cable gland in the terminal box entrance
• Insulation Class: Upgrade to Class “H” insulation rated at 180°C.
• Cooling: Forced ventilated, Self-ventilated by ducts, Air-to-water heat exchanger, WPI & WPII
• Current Transformers (CT) for Differential and Integral Protection: Configure for specific protection needs.
• Electrically Insulated Bearing: For enhanced safety and performance for both DOL & VVVF Drive Applications.
• Encoder: Supply incremental or absolute encoder for precise speed monitoring and speed control feedback.
• Grounding Brush: Equipped on the drive end shaft for improved earthing of the rotor circuit.
• Independent Hydraulic Oil Circulation System: Available for forced cooled sleeve bearings.
• Mounting Options: Includes vertical, horizontal, foot and flange, and NEMA standard mounting configurations.
• NEMA Standard meeting overseas project requirements.
• Noise Suppression: Installed at the air inlet and outlet for overall reduced noise levels.
• Non-Rotational Reverse Ratchet: Enhances safety of operation.
• Multiple Accessory Terminal Boxes: Customized to suit your specific requirements.
• Surge Capacitors & Lightning Arrestors: Available for enhanced incoming supply protection to windings.
• Service Factor: Rated for 1.10, 1.15 or 1.20 for extended performance.
• Shaft Options: Choose from special dimensions, double shaft ends, tapered shafts, hollow shafts, and specialty steel shafts.
• Signal Transducer: For monitoring and control purposes.
• Sleeve Bearing: Available for specific applications.
• Special Balance: Customized for precise applications.
• Special Bearings: To accommodate axial or radial thrust.
• Special Painting Plan: Tailored to your preferences.
• Oversized Steel Welded Terminal Box: Available in various sizes and designs based on internal space.
• Air Insulated Primary Terminal Boxes with phase segregated as an option.
• Temperature Detectors: Choose from thermistors (PTC or NTC) and thermostats (Bimetallic).
• Temperature Detectors: Resistance Temperature Devices (RTD) for winding and bearing temperature monitoring.
• Anti Condensation Heaters can be installed for dormant periods to keep the motor internals above dew point.
• Two terminal boxes can be provided and supplied as a primary & a neutral box for full interchangeability to suit the specific application, also allows for consolidation of spares when different handings are present.
• VFD Application: Compatible with variable frequency drive applications, including the TECO High Voltage MV510 series drive.
• Vibration Detector: Enhances monitoring and predictive maintenance, studs, platforms, or devices can be provided.
• Smart motor IOT 4.0: Suitable for the TECO series of smart motor devices that monitors vibration and motor temperatures.

Teco-Manual-REV07